The first DC isolatorfullycompliant with AS 60947.3:2018 DC-PV2
In Australia and New ZealandDC isolating switches must have a valid Certificate of Conformity confirming the product complies with AS 60947.3:2018DC-PV2.
And a breathing valve shall be attached on the DC isolator.
BYH-32 solar DC isolator up to 1000V is designed according to IEC60947-3 DC-21B / AS60947.3:2018 DC-PV2 standard.
The first DC isolator compliant with AS 60947 requirements, and can be used in worldwide solar DC systems.
Selected material and higher level test for 0 failure and safe in solar application
UV resistance and V0 flame retardant plastic material.
Patented arcextinguished instruction ensures the reliable electrical insulation performance.
Recommended to solar installers as a standard Solar isolator.
Find more infofrom thegrid connected solar PV systems install and supervise guidelines here.(超链接)
https://www.solaraccreditation.com.au/installers/compliance-and-standards/accreditation-guidelines.html
* IP66 forany positions mounting
* UV resistance and flame retardant material
* 3ms arc suppression
* AS 60947.3:2018 DC-PV2, IEC 60947.3
* Breather valve
* Lockable at off position
|
Model |
BYH-32 |
|
Poles |
2P 4P |
|
Standard |
AS60947.3:2018,IEC60947.3 |
|
Utilization Category |
DC-PV2 / DC-21B |
|
Rated Operational Voltage (Ue) |
500V,600V,800V,1000V |
|
Rated Current |
9A-40A |
|
Mechanical Cycle |
15000 |
|
Electrical Cycle |
1000 |
|
Protection Degree |
IP66 enclosure/IP20 switch body |
|
Polarity |
No Polarity |
|
Certificate |
SAA / TUV / CB |
